优势实例
U-501 DS 柴油工厂交换器化学除垢
Liquid Blast ATFM® 是独有的专利产品，可以在众多加工设备中去除严重的残留污垢
产品和技术
您的投入立即就可以有回报，因为工厂会恢复到最佳效率水平。这意味着人员安全和工厂完整性得到改善，并可显著降低生产成本，减少停产维护时间。
利用我们的产品和技术，最多可将维护停机时间减少 80%，并且我们的产品是可重复使用的。
清除众多残留污垢
Liquid Blast ATFM® 可以清除各种残留污垢。它不仅可以去除碳酸盐、盐化物和石灰的污垢，还可以去除碳氢化合物、衍生物、石蜡、环烷烃、有机硫化物、胺、氧化物和硅的污垢。
适合金属表面和塑料表面
Liquid Blast ATFM® 不会降低金属或塑料的性能，可以安全地用于钛、钢、不锈钢、铜、塑料和橡胶等材料。Liquid Blast ATFM® 还是出色的不锈钢钝化剂，可以减缓残留物的堆积。
安全环保
Liquid Blast ATFM® 已经过认证，符合行业安全标准和环境标准。我们成功的跟踪记录持续了十几年，Liquid Blast ATFM® 得到了能源行业的国际领先企业的认可。
恢复效率
大幅减少除垢时间
提高产量和效率
降低事故风险
可重复使用
可生物降解
通过行业认证
降低维护成本
延长机械使用寿命
优势
生产
- 减少停机时间
- 恢复设备设计产能效率
- 适用于众多行业
- 改善工厂完整性
安全
- 加强人员安全
- 经过认证，符合行业安全标准
维护
- 减少维护时间 80%
- 降低维护成本
- 广泛应用：
- 适用于清除各种残留污垢
- 可安全地用于所有金属和塑料
- 出色的不锈钢钝化剂
- 可重复使用
研发
- 内部研发部门
- 积极与学术机构合作
环境
- 可生物降解
创新
- 不需要准备工作
- 不需要专用设备
- 立即见效
- 投入即可有回报
应用
内部和外部除垢
- 液体塔
- 吸收塔
- 再生塔
- 气体分离塔
- 气体脱硫塔
外部清洗
- 储罐 球形、垂直、水平
- 金属组件 阀门、法兰、螺丝、管道、碳过滤器、拉西环等
- 隔热罐
- 储罐
- 液体塔
- 吸收塔
- 再生塔
- 气体分离塔
- 气体脱硫塔
- 储罐 球形、垂直、水平
- 金属组件 阀门、法兰、螺丝、管道、碳过滤器、拉西环等
- 隔热罐
研究和开发
ShemenSal 与科学家持续合作研究可再生能源，并从中受益。通过与科学家的化学实验室合作，我们确保 Liquid Blast ATFM® 在所有应用中的高效使用。我们还确保产品尽可能达到最佳效果。
我们主动分析不同材料可能发生的各种侵入情况，并检查各种材料在应用 Liquid Blast ATFM® 之前的完整性以确保符合标准。
安全
安全是 Shemensal 的头号大事。
我们的安全工程师与客户的安全团队合作，在应用前建立尽可能安全的规程。
在数百个工厂十几年的应用及使用 Liquid Blast ATFM® 的过程中，没有发生任何事故。
认证
ShemenSal 遵守最严格的质量、环境、健康和安全法规。Liquid Blast ATFM® 经过全面认证。
Daily profit increases
USD
Monthly average earning increases
USD
Cost of investment was recovered in one day!
优势实例
Chemical descaling of the ME-E-243 surface condenser of the Gas Compressor ME-C-203
Technical analysis concluded that the condenser ME-E-243 had a loss of vacuum due to an accumulation of scaling decreasing efficiency.
The incursion reduced ef ciency levels to 67.5% compared with the design capacity.
A 75% reduction in descaling time process was achieved, compared to traditional descaling: from 4 days to 1 day.
100% efficiency was restored after chemical descaling with Liquid Blast ATFM®.
Descaling time reduces
%
Total economic savings
USD
优势实例
Chemical descaling of the ME-E-133 surface condenser of the main blower ME- C-101 of a FCC1 Catalytic Plant
The FCC-1 catalytic plant restarted operations following a partial repair as there were problems with the vacuum of the main blower C-101.
The incursion reduced efficiency to 67% compared with the design capacity.
Following chemical descaling with liquid BLAST ATFM® the plant returned to 100% efficiency.
The descaling time was reduced from 8 days (mechanical descaling) to 1 day (chemical descaling).
Descaling time reduces
%
Total economic savings
USD
优势实例
Chemical descaling of a Regenerating 102-CO Tower
The tower while operating presenting a low processing capacity of 72% as well as a high differential pressure.
Descaling was performed utilizing 9,000 liters of Liquid Blast ATFM® product.
Following the descaling process the residues removed from the tower corresponded to 2,250 kg.
Descaling time was reduced from 12 days (traditional descaling) down to 5 days applying (Liquid Blast ATFM® descaling procedure).
Descaling time reduces
%
Efficiency of design capacity
%
Total economic savings
USD
The differential pressure was stabilized to design conditions
优势实例
Chemical descaling of CP75-V500 TYPE Compabloc Coolers
The EA-201’s and EA-202's poor amine plate coolers presented low efficiency due to MDEA input and output temperature differentials.
Descaling was carried out utilizing 300 liters of Liquid Blast ATFM®.
Descaling time was reduced from 60 days down to 1 day.
Descaling time reduces
%
Economic savings
%
compared to maintenance quotation of the manufacturer
Entry and exit temperatures of equipment decreased by
23
%
优势实例
External cleaning of Holding Tanks with reused product
At refinery N°1, holding tanks identified with inlay generated by the combined cycle thermoelectric system.
In refinery N°2, holding tanks showed signs of oxidation due to corrosive environment.
The cleaning of 5 tanks were carried out in 1 day.
Cleaning 2015
Cleaning 2017
